|
IR Transmitter
|
Modulation mode: FM
Frequency synthesis: digital PLL
Frequency band: 2.0 - 6.0MHz
Frequency response: 100-14kHz
Frequency stability: 10ppm
Pre-emphasis: 75 μSec.
Peak deviation: ±7.5kHz
Distortion at 1 kHz: <0.5%
Channel separation: >70dB
RF output power level: 700mV
|
RF output impedance: 55-75 ohms
Input impedance: 18k ohms
Max. input power level: 7.5V
AGC range: 30dB
S/N ratio: >75dB
Power consumption: 40W
Powe requirement: 110/240VAC, 50-60Hz
19" rack mountable case
Dimension: 430×99×325 mm
|
|
IR Radiator
|
Frequency band: 2.0 - 6.0 MHz
IR output power: 15W / 25W
Switchable output level: Low/High
Coverage range: up to 30 meters
Angle of half intensity: ±22°
RF output impedance: 55-75 ohms
|
RF input voltage: 100-2000mV
Power consumption: 55W, Stand-by 8W
Power Supply: 110/240VAC, 50-60Hz
Operating temperature: 0℃-40℃
Cable: 75Ω-4 coax, BNCconnectors
Dimensions: 450×211×82 mm
|
|
IR Receiver
|
Modulation mode: FM
Frequency synthesis: digital PLL
Frequency band: 2.0 - 6.0MHz
Frequency response: 100-14kHz
De-emphasis: 75 μSec.
Peak deviation: ±7.5kHz
Distortion at 1 kHz: <1%
S/N ratio: >55dB
Frequency stability: 10ppm
Operating voltage: 2.3V-3.6V
|
Power consumption: 50mW
Slide switch for channel selection
Switch for power on/off & volume control
3.5mm earphone output jack
Battery type: 2 x AAA alkaline or rechargeable
Pocket clip and lanyard for easy-wearing
Dimensions: 140×58×30 mm (HxWxD)
|
|
IR Receiver
|
Slide switch for power on/off
Thumbwheel switch for volume control
Up/down push buttons for channel selection
LCD shows channel number & battery level
Pocket clip and lanyard for easy-wearing
Battery: 3.7V rechargeable Lithium-ion
Integrated charging electronics & contacts
3.5mm phone output jack
|
Modulation mode: FM
Frequency synthesis: digital PLL
Frequency range: 2.0 - 6.0MHz
Frequency response: 100-14kHz
De-emphasis: 75 μSec.
Peak deviation: ±7.5kHz
Distortion at 1 kHz: <1%
S/N ratio: >55dB
Channel separation: >55dBA
Frequency stability: 10ppm
Power consumption: 50mW
Dimensions: 133×57×23 mm
|
|
Clip-on Headphone TC-D1
|
Type: dynamic 40mm
Single swivel clip-on hanger
Impedance: 40Ω±10%
Sensitivity: 102dB
Frequency response: 7Hz to 24KHz
Input power: 8-50mW
120cm cord with 3.5mm plug
Full range enhance system
Super bass frequency technology
|
|
Stereo Headphone TC-D3
|
Ergonomic design
Super heavy bass
Frequency response: 20 Hz - 20 kHz
Impedance: 32 ohms ±15%
Sensitivity: 94dB ±3dB
Maximum power input: 30mW
Adjustable headband & soft earcups
40mm drivers for dynamic stereo sound
120cm single entry cord with 3.5mm plug
|
|
Charging/Storage Case GX-20
|
Designed to be used for charging and storage of receiver units
Accommodates up to 20 receiver units with Li-ion battery packs
Microprocessor-based unit w/ smart charging circuit
DC 5V low voltage charging power
Independent LED indicators for charging status
About 10 hours needed to fully recharge 20 receivers
Receivers can be left in the case after the charge is complete
AC/DC adaptor w/ power cord
Power input AC100/240V 50-60Hz, output DC5V 8A
Dimensions: 59x30x18 cm (LxDxH)
|
|
Carrying/Storage Case GX-48
|
Handy locking aluminium/plastic suitcase
Designed for carrying/storage of receiver units
48 positions with pre-cut foam
Dimensions: 50×33×20 cm (WxDxH)
|